DTF Powder – TPU Large 150-250 Micro STDTFPAU250E
- Item Name: DTF Powder
- Item Code: STDTFPAU250E
- Particle Size: 150-250μm
To use DTF powder correctly, you should first print your design on DTF film using a DTF printer and DTF inks. After printing, while the ink is still wet, apply a liberal amount of DTF powder over the design. A sieve or shaker can be used to evenly distribute the powder. Then, shake off any excess powder. The goal is to ensure every part of the printed design is covered with the powder but without unnecessary waste.
Once the design is adequately covered with DTF powder, the print needs to be cured, or dried. This can be accomplished using a DTF oven, a conveyor dryer, or even a heat press if other options are not available. The curing process dries the ink and melts the powder, preparing the print for heat pressing onto the garment. It’s important to note that the curing temperature and duration should be accurately controlled to avoid over-melting or under-melting the powder, which could affect the transfer quality.
